The design of WebSolarLog makes it possible to run WebSolarLog on a low-costs and low-power device.
We recommend the following minimal specs:
- processor: 800MHz
- memory: 256MB
- diskspace: 2GB
WebSolarLog is successfully tested on the following devices:
Energy consumption of the RaspberryPi:
The RaspberryPi is a very low powered ARM device and consumes around the 4 – 4,5W.
We did a endurance test of a couple of day with the following setup:
The RaspberryPi can be powered by a USB-port. So we connected the USB-HUB to the grid and connected the RaspberryPi to one of the USB-ports of the HUB. The WiFi-dongle and RS485 converter were connected to the HUB. This setup consumed 130W a day, what gives it a average of 5,4W a hour. This setup consumes a whopping 47kWh a year, for this you have a fully functional Webbased Solar Logger.
If you have any questions, suggestions or what so ever regarding this post, feel free to post on our google support forum: